Industrial Metal Primers & Enamel Paints

NUMBER ONE PAINTS

Ultra Premium Quality: Nett 1 Litre Number One Paint is a general purpose economical single pack air drying metal primer based on an alkyd resin.

Surface Preparation : The surface to be painted should be free from grease, rust, oil loose matter.Sand the surface with emery paper 320 and wipe clean.

Method of Application : After proper surface preparation Number One Red Oxide Metal Primer can be applied with brush / spray.

Recoating & Thinner : Should wait for atleast 12 hours minimum from first coat. Turpentine / GP Thinner

Product Details

• State/Form: Liquid
• Surface of Application: Walls,Steel, Ceiling
• Brand: Number one
• Application Method: Brush, Spray

Available Colors

Syn Furniture Enamel Glosy	General Purpose Syn Enamel Glosy	General Purpose Syn Enamel Glossy	Hammer Tone Finish
Nikkel Grey	L.R.Green	Dawn	Tex Green
Asn T.A Grey	T.R.Green	Lemon Yellow	Light Green
New T.A Grey	Olive Green	Golden Yellow	Elgi Green
Light Grey IS 631	Grey Green	Golden Brown	Silver Ash
Smoke Grey	Bus Green	Signal Red	Mid Grey
AD Grey	Satin Blue	P.O Red	Dark Grey
D.A. Grey IS 632	Phiroza Blue	T.R Red	Tex Blue
Piste Green	F.R.Blue	Cherry Red	Light Blue
Opaline Green	Oxford Blue

Specifications

Minimum Order Quantity	12 Litre
Application Method	Brush ,Spray
Feature	Anti Fouling ,Waterproof
Form of Paint	Liquid
Surface of Application	Walls ,Steel ,Ceiling

Red Oxide Metal Primer is a highly durable, water based Cement Primer.

Directions To Use : Number One Red Oxide Metal Primer can be applied by brush, roller or spray.

Surface Preparation :
Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

Thinning : Thin 1 Litre of Number One Cement Primer with maximum of 500ml water.

PRIMING : In case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.

Finishing : Apply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.

Ease of Application : HEALTH. SAFETY AND ENVIRONMENTAL SECURITY Store in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet.

Product Details

• State/Form: Liquid
• Color: Red Oxide
• Surface of Application: MS, Aluminium & GI Base
• Brand: Number One Paints
• Turpentine or Equalant: Thinner

Specifications

Brand	Number One Paints
Color	Red Oxide
State/Form	Liquid
Surface	MS, Aluminium & GI Base
Application	Anti Corrosive
Thinner	Turpentine or Equalant
Surface Preparation	Ensure surfaces are sound, dry and free from grease, wax and oil. Use a suitable oil and grease remover to clean the surface if necessary. Remove all loose or defective paint back to a !rm edge. In the case of iron and steel, remove all loose scale and rust by thorough scraping and wire brushing

Zinc Chrome Yellow Primer primer is a highly durable, water based cement primer.

Directions To Use : Number one Zinc Chrome Yellow Primer primer can be applied by brush, roller or spray.

Surface Preparation : Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking Paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required.Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used uiherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

Thinning : Thin 1 Litre of Number One Cement Primer with maximum of 500ml water.

Priming : In case of freshly plastered walls, apply 1 coat of Number One Cement Primer after thinning with water in the ratio of 1 : 0.5 by volume. For better performance Number One Paints Cement Primer is recommended.

Finishing : Apply 2 coats of Number One Premium Emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.

Ease of Application :
Health. Safety And Environmental Security Store in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed.Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label.Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; Refer to special instructions/Safety data sheet.

Specifications

Brand	Number One Paints
Color	Yellow
Surface	MS, Aluminium & GI Base
FORM	Liquid
Application	Anti Corrosive
Thinner	Turpentine or Equalant
Surface Preparation	Ensure surfaces are sound, dry and free from grease, wax and oil. Use a suitable oil and grease remover to clean the surface if necessary. Remove all loose or defective paint back to a !rm edge. In the case of iron and steel, remove all loose scale and rust by thorough scraping and wire brushing.

Number One Paints Enamel Thinner for synthetic enamel is specially formulated for use with general purpose enamel and undercoats to get optimum results. It can also be used with any standard formulations of general purpose industrial paint.

Use enamel thinner for synthetic enamel thinner for quick setting finish with excellent flow and gloss. For easy application, the recommended thinning ratio is depending on the products & application viscosity of paints.

Nett 1, 5, 20 liter

SAFETY. SECURITY. HEALTH & ENVIRONMENTAL INFORMATION :
Keep away from childrenKeep container tightly closed when not in use. Keep thinner away from sources of ignition. A vapour mask should be worn when using this product at all times. In case of contact with eyes rinse with plenty of water and seek medical advice, if required. Remove splashes from skin with soap and water or a recognized skin cleanser, in case of ingestion, immediately seek medical attention. Do not pour leftover thinner into drains. Seal and keep for disposal.

Product Details

• Physical State: Liquid
• Usage: Industrial
• Packaging Size: 1,4 & 20 Liter

Specifications

Brand	Number One Paints
Color	All Colors
Packaging Size (ex. 1L or 1Kg)	1,4 & 20 Liter
Surface of Application	Metal

Number one paints enamel thinner for synthetic enamel is specially formulated for use with general purpose enamel and undercoats to get optimum results. It can also be used with any standard formulations of general purpose industrial paint.

Use enamel thinner for synthetic enamel thinner for quick setting finish with excellent flow and gloss. For easy application, the recommended thinning ratio is depending on the products application viscosity of paints.

Nett 1, 5, 20 liter

Safety, Security & Health environmental information :
keep away from childrenkeep container tightly closed when not in use. Keep thinner away from sources of ignition. A vapour mask should be worn when using this product at all times. In case of contact with eyes rinse with plenty of water and seek medical advice, if required. Remove splashes from skin with soap and water or a recognized skin cleanser, in case of ingestion, immediately seek medical attention. Do not pour leftover thinner into drains. Seal and keep for disposal.

Product Details

• Physical State: Liquid
• Usage: Industrial
• Packaging Size: 1,4 & 20 Liter

Specifications

Physical State	Liquid
Usage	Industrial

Ultra Premium Quality: -Nett 1 Litre Number One Paint is a general purpose economical single pack air drying metal primer based on an alkyd resin

Surface Preparation: The surface to be painted should be free from grease, rust, oil loose matter.Sand the surface with emery paper 320 and wipe clean

Method of Application: After proper surface preparation Number One Red Oxide Metal Primer can be applied with brush/spray.

Recoating Thinner: Should wait for at least 12 hours minimum from the first coat. Turpentine / GP Thinner

Product Details

• Form of Paint: Liquid
• Surface of Application: Metal
• Application Method: Brush
• Types: Floor Enamel

Available Colors

Syn Furniture Enamel Glosy	General Purpose Syn Enamel Glosy	General Purpose Syn Enamel Glossy	Hammer Tone Finish
Nikkel Grey	L.R.Green	Dawn	Tex Green
Asn T.A Grey	T.R.Green	Lemon Yellow	Light Green
New T.A Grey	Olive Green	Golden Yellow	Elgi Green
Light Grey IS 631	Grey Green	Golden Brown	Silver Ash
Smoke Grey	Bus Green	Signal Red	Mid Grey
AD Grey	Satin Blue	P.O Red	Dark Grey
D.A. Grey IS 632	Phiroza Blue	T.R Red	Tex Blue
Piste Green	F.R.Blue	Cherry Red	Light Blue
Opaline Green	Oxford Blue

Specifications

Minimum Order Quantity	12 Litre
Application Method	Brush ,Spray
Feature	Anti Fouling ,Waterproof
Form of Paint	Liquid
Surface of Application	Walls ,Steel ,Ceiling

Number One Paints Enamel Thinner for synthetic enamel is specially formulated for use with general purpose enamel and undercoats to get optimum results. It can also be used with any standard formulations of general purpose industrial paint. Use enamel thinner for synthetic enamel thinner for quick setting finish with excellent flow and gloss. For easy application, the recommended thinning ratio is depending on the products application viscosity of paints.

Safety. Security. Health Environmental Information
Keep away from children Keep container tightly closed when not in use. Keep thinner away from sources of ignition. A vapour mask should be worn when using this product at all times. In case of contact with eyes rinse with plenty of water and seek medical advice, if required. Remove splashes from skin with soap and water or a recognized skin cleanser, in case of ingestion, immediately seek medical attention. Do not pour leftover thinner into drains.

Nett 1 Liter

Product Details

• State/Form: Liquid
• Packaging Size (ex. 1L or 1Kg): 1ltr
• Color: Yellow

Water Based Cement Wall Primers Exterior is a highly durable, water based cement primer.

Directions To Use : Number one cement primer can be applied by brush, roller or spray.

Surface Preparation : Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

Thinning : Thin 1 litre of number one cement primer with maximum of 500ml water.

Priming : In case of freshly plastered walls, apply 1 coat of number one cement primer after thinning with water in the ratio of 1 : 0. 5 by volume. For better performance number one paints cement primer is recommended.

Finishing : Apply 2 coats of number one premium emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.

Ease Of Application :
Health. Safety And Environmental Security Store in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; refer to special instructions/safety data sheet.

Specifications

Brand	Number One Paints
Color	White
Packaging Size (ex. 1L or 1Kg)	1,5,10 20 Kg
State/Form	Powder,Liquid
Surface of Application	Wall

Water Based Cement Wall Primers Exterior is a highly durable, water based cement primer.

Directions To Use : Number one cement primer can be applied by brush, roller or spray.

Surface Preparation : Ensure surface is througly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a ujire/stiff coir brush, followed by water jetting if required. Dry sanding, flame cutting and/or uielding of the dry paint film may give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible, if exposed can be avoided by the provision of the local exhaust ventilation, suitable respiratory protection equipment should be used. For areas severely affected by algae fungus. Avoid application of putty or filing compound uihile painting an exterior surface.

Thinning : Thin 1 litre of number one cement primer with maximum of 500ml water.

Priming : In case of freshly plastered walls, apply 1 coat of number one cement primer after thinning with water in the ratio of 1 : 0. 5 by volume. For better performance number one paints cement primer is recommended.

Finishing : Apply 2 coats of number one premium emulsion for normal surfaces with 4-6 hours between coats. 3 coats may be required in case of darker colour for further details refer product data sheet.

Ease Of Application :
Health. Safety And Environmental Security Store in a cool dry well ventilated place away from source of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children, if swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Wear suitable gloves. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleansed, do no use solvent thinners or white spirits. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Do not empty into drains. Use only in well ventilated areas. Do not use empty contained for storing food. Remove as much paint as possible from brushes and rollers before cleaning. Harmful to aquatic organisms, may cause long term adverse effects in the aquatic environment. Avoid release to the environment; refer to special instructions/safety data sheet.

Specifications

• State/Form: Aerosol
• Packaging Size (ex. 1L or 1Kg): 1 ltr
• Surface of Application: Cemented walls

Ultra Premium Quality: Nett 1 Litre Number One Paint is a general purpose economical single pack air drying metal primer based on an alkyd resin

Surface Preparation: The surface to be painted should be free from grease, rust, oil loose matter.Sand the surface with emery paper 320 and wipe clean

Method of Application: After proper surface preparation Number One Red Oxide Metal Primer can be applied with brush / spray.

Recoating Thinner: Should wait for atleast 12 hours minimum from first coat. Turpentine / GP Thinner

Specifications

• Form of Paint: Liquid
• Surface of Application: Wood/Metal
• Application Method: Brush