Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd
welding electrode manufacturing plants manufacturer electrode manufacturing plants manufacturer welding electrode manufacturing machine manufacturer Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd
Our Products
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd




Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd
 
Eureka Systems and Electrodes Pvt. Ltd
Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd Eureka Systems and Electrodes Pvt. Ltd

Home » Decorative Paints

Wall Putty

Wall Care Putty

German Technology Coverage : 1.2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1.5 mm depending on the surface level.

Substrate Quality : The substrate should be free from grease, oil and loosely adhering particles.

Substrate Preparation : Clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.

Application Method : First mix the supplied NUMBER ONE Wall Care Putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained.Apply 1st coat of NUMBER ONE Wall Care Putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem.After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled POP applicators.

Specifications
Minimum Order Quantity 40 Pack
Categories Building Coating, Wall Coating
Packing Size 5 Kg, 20 Kg, 40 Kg, 1kg
Putty Form Powder
Raw Material White Cement
Brand Number one




White Cement Putty

German Technology Coverage : 1. 2 kg powder / m2 / mm thickness. One bag of 40 kg covers approx. 200-220 sft in 2 coats for maximum thickness of 1. 5 mm depending on the surface level.

Substrate Quality : The substrate should be free from grease, oil and loosely adhering particles.

Substrate Preparation : Clean the surface with the help of emery stone, putty blade or wire brush. Moisten the wall with sufficient quantity of clean water. There should not be any mildew or algae on the surface.

Application Method : First mix the supplied number one wall care putty with recommended water (14 litre), by weight of powder as printed on the packaging. Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of number one wall care putty uniformly on already moistened surface with the help od putty blade or trowel. Mix only that quantity which can be applied within workable time. After surface drying of the 1 st coat apply 2nd coat with fresh material. The total thickness of 2 coats should be maximum 1,5mm. Uneven thickness due to unskilled application may cause problem. After complete drying and hardening, the surface should be prepared with fine waterproof emery paper before painting. Finishing should be done by skilled pop applicators.

Specifications
Categories Wall Coating,Building Coating
Packing Size 1,20 & 40 Kg
Putty Form Powder



Eureka Systems and Electrodes Pvt. Ltd



Looking for Product Name ?